Basic Card Printing Methods; Turning The Printer On And Off - Canon IX-R7000 Operation Manual

Basic Card Printing Methods

This section explains the basic flow of operations, from turning the power on to printing a card.

Turning the Printer On and Off

Be sure to turn the printer.
Make sure the following are complete prior to turning the power on.
• The ink ribbon cartridge is loaded
• The transfer film is loaded
• The front cover is closed
• The top cover is closed
• The printer is connected to the computer
• The printer driver is installed

If the preparations above have not been performed, follow the instructions in
the "Getting Started Guide".
1
Press the power switch to turn the
power on.
• Press " | " on the power switch to turn the printer on.
• After [Initializing..] appears on the LCD panel, the
operating indicator turns blue and [Ready to Print]
appears.
• Press "O" on the power switch to turn the power off.

While the printer is operating, do not turn off the power, unplug the power
cord, or look inside the printer. If the power is turned off while the printer is
operating it willnot be possible to remove the film cassette. If you turn the
printer off by mistake, turn the power on again.

If a card is in the printer when the power is turned on, it is ejected from card ejection
Note
slot (left) (default setting).

If the LED Indicator turns orange/blinks, refer to "Troubleshooting" on page 68.
Basic Card Printing Methods
Ready to Print
6