Cleaning; Before Cleaning; Cleaning With A Cleaning Card - Canon IX-R7000 Operation Manual

Cleaning

The rollers need to be cleaned to maintain good print quality.
This section explains which rollers need to be cleaned and how to clean them.

Before Cleaning

Please take the following precautions when cleaning the rollers.

When cleaning the printer, do not use a flammable solvent such as thinner,
benzene, or alcohol.

Prior to cleaning, be sure to turn the printer off and remove the power plug
from the power outlet.

Remove any cards that are inside the printer.

After cleaning the rollers, do not use the printer until the rollers are dry (wait
at least five minutes).

Do not touch the rollers with your bare hands.

Cleaning with a Cleaning Card

Use the cleaning card (provided) to clean the transport roller if cards do not feed smoothly.
We recommend cleaning the rollers after printing about 1,000 screens.

Cleaning cards can only be used once and cannot be reused. Use a new
cleaning card with the adhesive side down every time you clean the rollers.
→See "Cleaning Card" on page 84 for details about which cleaning cards you can use.

Once cleaning is finished ([Finish] appears on the LCD panel), change back
to normal mode. The device is in the cleaning process until you change it
back to normal mode.

Observe the following precautions while the cleaning process is in progress.
• Do not turn off the power.
• Do not operate the printer in any way, such as opening or closing the front cover.
• Do not print.
Cleaning
56