Table of Contents
Advertisement
Error message
Card Jam F.Turn
Card Jam Print
Card Feed Remove
Card Turn Remove
Card Pr Remove
Card Hr Remove
Service Call
Download Error
Command Error
Cause and solution
There was a card jam.
Press the SET key.
An error occurred, and cards cannot be output.
Remove the cards, and press the SET key.
→See "When a Card is Jammed..." on page 75 for instructions on how to remove
cards.
The ink ribbon may be cut.
Repair the cut ink ribbon.
→See "If the Ink Ribbon or Transfer Film are Cut" on page 76 for instructions on
how to repair a cut ink ribbon.
Frequent card jams could mean the following:
Is the transport roller dirty?
Clean the transport roller.
If the transport roller is excessively dirty, continue cleaning using a
new cleaning card.
→See "Cleaning with a Cleaning Card" on page 56 for instructions on cleaning
the transport roller.
There was a card jam.
Remove the cards, and press the SET key.
→See "When a Card is Jammed..." on page 75 for instructions on how to remove
cards.
Frequent card jams could mean the following:
Is the transport roller dirty?
Clean the transport roller.
If the transport roller is excessively dirty, continue cleaning using a
new cleaning card.
→See "Cleaning with a Cleaning Card" on page 56 for instructions on cleaning
the transport roller.
An error that requires repair may occur.
The cause of the error differs depending on the error code.
Turn the power off and on.
If the same error occurs again, contact your place of purchase.
Program version update was interrupted.
Turn the power off and on, then restart version update.
Turn off and on the power.
Troubleshooting
72
Advertisement
Table of Contents
