Table of Contents
Advertisement
Problem
Print flakes off.
White cards (unprinted
cards) are output.
The black area prints
normally, but the color (CMY)
area exhibits peeling.
ABC
79
Cause and solution
Secondary transfer conditions (speed and temperature) are not
optimum.
Set secondary transfer conditions in accordance with cards used.
→See "Setting the Types of Card to Use" on page 43 for instructions on setting
secondary transfer conditions.
Update to the latest firmware version.
→See "Checking the Firmware Version" on page 85
→See "Update the Firmware" on page 85
If the problem occurs with the latest firmware version, decrease
the [Balance Black] setting value gradually.
→ See "Adjusting the Hue" on page 35 for details.
If black text become blurred during printing after adjustment,
select [HIGH QUALITY]] in the [Print Quality Bk].
→ See "Black text becomes blurred or thin." on page 81 for details.
Advertisement
Table of Contents
