Removing Cards - Canon IX-R7000 Operation Manual

5
Click [Print].
• Printing starts.
• Cards are pulled into the printer and the LED Indicator
blinks blue.
[Now Printing] appears on the LCD panel.
• If the cards are not loaded, [Card Empty] appears on
the LCD panel.

Removing Cards

The factory default is for printed cards to be ejected from card ejection slot (left).
1
Removing cards from the card stacker.
• You can remove loaded cards from the slit on the side
of the card stacker (see diagram at right).

The card ejection slot (left) card stacker has a maximum capacity of approximately
Note
250 cards.
When ejecting cards from the card ejection slot (left), empty the card stacker when it
has approximately 250 cards.

The factory default is set so that correctly printed cards are output from the card
ejection slot (left), and cards with errors are output from card ejection slot (right).
→See "Switching the Card Ejection Slot" on page 48 for information about switching the card ejection
location.
→See the "Getting Started Guide" for instructions on removing the card stacker.

The factory default status is to have the front facing down for single-sided printing, and
facing up for double-sided printing.
→See "Set the Orientation of Cards to Eject" on page 51 for the orientation of cards to eject.
Basic Card Printing Methods
12