Figure 24: Disconnect The Rear Panel And Remove The Battery Box Container; Figure 25: Remove Power Supply Board - Owon SDS Series Service Manual

Figure 24: Disconnect the rear panel and Remove the battery box container

5. Battery box Container
Remove the four screws marked in red in the figure above.
Lift the battery box container a little, be ware that it is still be connected by the battery
power cable, which marked in
Press clip and pull connector out and move the Battery box Container away.
6. Power supply Board
Remove the four screws marked in the figure above.
The cable marked is the power cable of adapter plate. Disconnect it.
Lift off the power supply board.
Section 5: Maintenance
C in the figure above.

Figure 25: Remove power supply board

27