Figure 26: Screws And Cables Of The Adapter Plate; Figure 27: Remove The Adapter Plate - Owon SDS Series Service Manual
Smart digital storage oscilloscopes
Hide thumbs
Also See for SDS Series:
- User manual (98 pages) ,
- Quick manual (28 pages) ,
- Service manual (46 pages)
Table of Contents
Advertisement
7.
Adapter plate
Remove the five screws marked in the figure above.
Disconnect the A, B and C connector.
Pull out the adapter plate carefully.
8.
Chassis (including Fan and LCD)
Take off the plastic ring marked with A in the figure below.
Section 5: Maintenance
Figure 26: Screws and cables of the adapter plate
Figure 27: Remove the adapter plate
28
Advertisement
Table of Contents
Troubleshooting
