Section 2: Installation; Performing The General Inspection; Operating Environment; Storage And Transport - Owon SDS Series Service Manual

2.1 Performing the General Inspection

When you have got a new SDS oscilloscope, it is suggested that you should perform a general
inspection on the instrument according to the following steps.
2.1.1 Check whether there is any Damage on it Due to Transportation
If the packing boxes or foam cushions are found in serous damage, keep them in a proper place till
the complete instrument and accessories have passed the electrical and mechanical tests.
2.1.2 Make a Check on Accessories
The accessory list has been described in the picture of Digital Oscilloscope Parts of this manual.
You can make a check and find whether there is any accessory loss with reference to the Appendix.
In case of any accessory loss or damage, consult the OWON dealer responsible for such a business
or the local office of OWON.
2.1.3 Make a Check on the Complete Instrument
If the instrument is damaged in its appearance or it fails in normal operation or performance test,
consult the OWON dealer responsible for such a business or the local office of OWON. If the
instrument is damaged due to transportation, keep the packing in a proper place and consult the
transportation department and the OWON dealer responsible for such business, who will provide
an instrument replacement or maintenance

2.2 Operating Environment

Table 3: Environment

Temperature
Relative Humidity
Height
Cooling Method

2.3 Storage and Transport

Do not store or place the instrument in locations where the liquid crystal display (LCD) may be
directly exposed to the sunshine for a long time.
Be careful: Do not make spraying agent, liquid and solvent touch with probes to avoid the
instrument or probe being damaged.
If the oscilloscope is to be stored for a long time, it is required to charge the lithium battery before
storage.
Take and put gently and prevent rain in the process of transportation.

Section 2: Installation

Section 2: Installation
Working temperature: 0 ℃～ 40 ℃
Storage temperature: -20 ℃～ 60 ℃
≤ 90%
Operating: 3,000 m
Non-operating: 15,000 m
Natural convection
9