Rear Panel - Owon AS Series User Manual

15
+/-/XY
16
Volts/DIV
17
△
Position
▽
A
E
18
Var (left side)
19
Power switch

Rear Panel

No. Name
3.User Guidebook
+: Trigger on rising slope. Triggering occurs when
the triggering signal crosses the triggering level in
positive-going direction.
-: Trigger on falling slope. Triggering occurs when
the triggering signal crosses the triggering level in
negative-going direction.
XY: This position is used when using the instrument
as an X-Y oscilloscope.
Adjusting sensitivity of vertical system.
Control vertical position of trace on the screen.
Continuously adjusting the sensitivity of vertical
system. Turn clockwise until the waveform does not
change is the calibration position.
Main power on/off.
Figure 3-2 Rear Panel
Description
6
20
21