Mechanical Installation - Pepperl+Fuchs DPU1100 Series Manual

VisuNet Display Unit
Installation
3.3

Mechanical Installation

Note
For system installation instructions and complete mounting options, see the VisuNet GXP
System Manual.
Mounting the PCU/TCU onto the DPU
1.
Ensure the correct position of the PCU/TCU.
2.
Place the PCU/TCU with the Pepperl+Fuchs connector above the Pepperl+Fuchs socket on
the back of the display unit.
3.
Carefully push the Pepperl+Fuchs connector into the Pepperl+Fuchs socket.
17