Bluetooth Interface - Pepperl+Fuchs DPU1100 Series Manual

VisuNet Display Unit

Bluetooth Interface

5 Bluetooth Interface
Pepperl+Fuchs' DPU1100/DPU1200 series display units are available with an optional Blue-
tooth® interface. This enables Bluetooth devices (i.e., an Ident-Ex® 01 handheld scanner) to
be used with VisuNet HMI systems.
For the Bluetooth interface to work properly, you must disable a Windows® setting that allows
the computer to automatically turn off Bluetooth.
Perform the following steps to disable the Bluetooth power management setting:
Disabling Bluetooth® Power Management Setting
1.
Navigate to the "Hardware and Sound" section of the Windows control panel. Select the
"Device Manager" under "Devices and Printers."
2.
Right click "Generic Bluetooth Radio" under "Bluetooth Radios."
3.
Open the "Power Management" tab and deactivate the option "Allow the computer to turn off
this device to save power."
Note
For detailed instructions on connecting Bluetooth devices to VisuNet RMs and thin clients, see
the RM Shell 5 manual.
25