Gloves Tested For Touch Sensitivity - Pepperl+Fuchs DPU1100 Series Manual

VisuNet Display Unit
Appendix
6.3

Gloves Tested for Touch Sensitivity

This section lists selected gloves and their touch sensitivity with the capacitive touch screen.
This test was conducted by Pepperl+Fuchs.
Warning!
Warning!
It is the end-user's responsibility to choose appropriate gloves. The below list is not exhaustive,
and it only deals with touch sensitivity. The ratings do not indicate, for example, whether a glove
has chemical resistance.
Note
To improve the touch detection rate with gloves, touch with the flat side of your finger and not
with your finger tip.
Note
The sensitivity of a TCU-based system touch screen can be configured in the RM Shell. The
sensitivity of a PCU-based system touch screen can be configured with the Windows tool.
Rating Scale
+++
++
+
The following gloves have been tested for use with the display unit:
Nitrile Gloves
Nitrile gloves NITRITEC
Cotton gloves and two layers of Nitril gloves
NITRITEC
Latex Gloves
Marigold Industrial SOLVAPLUS
Marigold Industrial Emperor Mediumweight
Mapa Professionnel Technic 450
Disposable gloves SEMPERGUARD
Disposable gloves AccuTech Sterile Coated
Disposable gloves Nutex® DermaShield®
Chemical Protection Gloves
Chemical protection gloves EKASTU
28
High touch sensitivity, easy to operate the
touch screen
Some touch sensitivity, possible to operate the
touch screen
Little touch sensitivity, difficult to operate the
touch screen
Rating
+++
+++
Rating
+++
+++
++
+++
+++
++
Rating
++