VisuNet Display Unit
Installation
4.
Use the mounting screws to attach the PCU/TCU onto the display unit (tightening torque 2 Nm).
Figure 3.1
Caution!
Damage to pins
Carefully align the PCU/TCU with the DPU when connecting the units. Mounting or dismount-
ing the PCU/TCU at an angle can damage the pins.
3.4
Repair
Note
The DPU can be dismounted from the PCU/TCU and sent to Pepperl+Fuchs for repair and/or
replacement. For mounting and dismounting instructions, see the VisuNet GXP system
manual.
18
Mounting the TCU/PCU onto the display unit