Table of Contents
Advertisement
Figure 8 Attachment of front mount bracket to front rack cabinet posts
8. Extend the length of the rail until fully mating the rear mount bracket pins in the mirror location on the rear rack post.
Figure 9 Adjustment of rail length to fit rack cabinet
9. Verify that the rails are level at the same height on both rack posts, and that all mount bracket location pins fully seat in
identical locations in the rack posts.
10. Facing the rear of the rack cabinet, insert a Phillips-head M5 x 15 screw into the center hole of the rear mount bracket.
24 Chapter 4 Installation of 2U enclosures
Advertisement
Table of Contents
