Drive operation and maintenance
Drive operation and maintenance
Introduction
Front panel LED
STT20000A Product Manual
This chapter describes important operational procedures for the STT20000A. It
covers the following topics:
•
Use of the front panel LED
•
Using cartridges
•
Loading revised firmware (updating flash EEPROM)
•
Drive maintenance and troubleshooting instructions.
The front panel of the Travan drive (see Figure 4-1) contains the cartridge opening
and one amber light-emitting diode (LED). This LED is lit any time that the tape is
NOT at the beginning of the tape. Thus, the LED indicates tape movement.
Figure 4-1
Front panel—internal drive
DRIVE ACTIVE
(AMBER)
Chapter 4
4
Page 23