b. If the anti-tamper lock is engaged, use a T20 Torx driver to unlock both drawer pull handles.
c. Simultaneously press both drawer latches inward and hold them there while exerting even outward pressure until all
three rows are visible and the drawer slide latch locks in the open position.
d. Stop when the drawer rails engage the safety lock latches as the drawer reaches the open position, so that you can
access all three rows of DDICs.
2. Complete the following actions to remove a faulty DDIC:
84 Chapter 10 In-service field maintenance for 5U enclosures
Figure 54 Operator's panel
Figure 56 Drawer release and access
Figure 55 Drawer panel