Expansion enclosure chassis
Chassis sheet metal is bonded and riveted together and free from non-conductive coatings. Each chassis is designed
specifically for mounting in a rack cabinet.
2U enclosure components
The front panel area hosts an operator's panel and the drive modules.
2U12— Contains 3.5-inch large form factor (LFF) drives installed in keyed carriers, inserted into horizontal slots, and
l
logically numbered in rows from 0 to 11 from left to right, from top to bottom
2U24— Contains 2.5-inch small form factor (SFF) drives installed in keyed carriers, inserted into vertical slots, and logically
l
numbered from 0 to 23 from left to right
Chapter 2 System overview
11