www.seagate.com
3.3
Nytro XP6210 Card Characteristics
The Nytro XP6210 card uses a full-height, and half-length PCIe board.
The Nytro XP6210 card uses a SAS2008 controller with drive firmware that runs on its internal processor. The controller
connects to four embedded nonvolatile memory modules. The Nytro XP6210 card can be used for either persistent or
nonpersistent data and offers high-performance with low latency and a low CPU burden.
The following figure shows the Nytro XP6210 card.
Figure 10 Nytro XP6210 Card
3.3.1
Bracket LEDs
Three board-mounted, right-angle LEDs shine through holes in the PCI bracket: one is for data activity, one is for life,
and one is for status. The LEDs are labeled on the bracket.
Seagate Nytro WarpDrive and Nytro XP6000, Rev. 1.12
Nytro XP6210 Card Characteristics
22