AJAX FireProtect 2 Jeweller User Manual page 27

It is necessary to perform a
Malfunctions
If FireProtect 2 malfunction is detected (for example, there is no connection with
the hub), the malfunction counter is displayed in the device eld in the Ajax
apps.
All malfunctions are displayed in the detector
are highlighted in red.
The device can report malfunctions to the CMS, as well as to users through
push noti cations and SMS.
FireProtect 2 (Heat/Smoke/CO) malfunctions
No connection with the hub or radio signal range extender.
The detector's enclosure is open.
Low battery charge level.
The device service life has expired.
Hardware malfunction (failure of one or more sensors of the detector).
self-test after the installation is nished.
States . Fields with malfunctions