AJAX FireProtect 2 Jeweller User Manual page 17

Learn more
States
The states include information about the device and its operating parameters.
You can see FireProtect 2 (Heat/Smoke/CO) states in Ajax apps. To access
them:
1. Open the Ajax app.
2. Select a hub if you have several of them or if you are using the Ajax PRO
app.
3. Go to the Devices
4. Select the device from the list.
Parameter
Temperature
Jeweller Signal Strength
Connection via Jeweller
tab.
Air temperature in the room where FireProtect 2
is installed. Measured in Celsius or Fahrenheit
degrees depending on the app settings.
In the normal state, the temperature value is
displayed in black.
When a temperature rise or threshold exceeding
is detected, the eld highlights red and displays
the High Temperature text.
Jeweller signal strength between FireProtect 2
and the hub or radio signal range extender.
The recommended value is two or three bars.
Jeweller is a protocol for transmitting
FireProtect 2 events and alarms.
Connection status between FireProtect 2 and
the hub or range extender via Jeweller:
Meaning