AJAX FireProtect 2 Jeweller User Manual page 21

2. Select the hub if you have several of them or if you are using the
app .
3. Go to the Devices
4. Select the device from the list.
5. Go to Settings by clicking on the gear icon
6. Set the required settings.
7. Click Back to save the new settings.
Settings
Name
Room
If temperature threshold exceeded
If rapid temperature rise detected
If smoke is detected
tab.
Detector name. Displayed in the list of hub
devices, text of SMS and noti cations in the
events feed.
To change the name, click on the text eld.
The name can contain up to 12 Cyrillic
characters or up to 24 Latin characters.
Selecting the virtual room to which FireProtect 2
is assigned.
The room name is displayed in the SMS text
and noti cations in the events feed.
To change the room, click on the eld.
Alert with a siren
When this option is enabled, the
connected to the system are activated when the
detector detects a temperature threshold
exceeding.
When this option is enabled, the
connected to the system are activated when the
detector detects a rapid temperature rise.
When this option is enabled,
connected to the system are activated when the
detector detects smoke.
.
Meaning
Ajax sirens
Ajax sirens
Ajax sirens
Ajax PRO