AJAX FireProtect 2 Jeweller User Manual page 11

The red LED blinks
every 8 seconds.
The red LED blinks 2
times in a row.
The yellow LED lights
up for 1 second.
The green LED lights
up for 1 second.
Green, yellow, and red
LEDs light up in turn,
then go off.
Green, yellow, and red
LEDs light up at the
same time, then go
off in reverse order.
The green LED is
permanently on.
The green LED blinks
6 times in a row.
The siren beeps 3
times every 3
seconds.
No.
No.
No.
No.
No.
No.
No.
The system has a
muted alarm by
smoke/rapid
temperature
rise/temperature
threshold exceeded,
as well as an active
alarm by a high CO
level exceeding 300
ppm.
Restore after alarm.
Tamper alarm.
The detector is
removed from the
SmartBracket
mounting panel.
The detector is
installed on the
SmartBracket
mounting panel.
Turning the detector
on.
Turning the detector
off.
Connection to the hub
in progress.
The detector has
been removed from
the hub.
The alarm cannot be
muted if the CO level
exceeds 300 ppm.
The LED and sound
indication for alarm by
smoke/rapid
temperature
rise/temperature
threshold exceeded
resumes if the source
of the alarm is still
present after the
muting timer (10
minutes) has expired.
If the source of the
alarm is removed, the
detector is restored
automatically.
Turns on when the
tamper is triggered.
To turn on the detector,
hold the power button
for 1 second.
To turn off the
detector, hold the
power button for 2
seconds.
The indication turns off
after the detector is
connected to the hub.
The indication turns on
when the detector
receives information
that it has been
removed from the hub.