AJAX FireProtect 2 Jeweller User Manual page 18

Battery Сharge
Lid
Online — the detector is connected to the
hub or range extender. Normal state.
O ine — no connection between the
detector and the hub or range extender.
Check the detector connection.
The battery charge level of the device:
OK — detector batteries have su cient
charge. Normal state.
Battery low — detector batteries are
discharged.
When the batteries are discharged, users and
the security company monitoring station receive
a noti cation.
After the low battery noti cation, the detector is
able to operate for another month under normal
conditions. In case of an alarm, the battery
charge is enough to ensure 4 minutes of the
sound and LED indication operation.
How the battery charge is displayed
Battery life calculator
You can replace batteries in a detector with
replaceable batteries only (has RB in its name).
A detector with sealed batteries (with SB in the
name) should be replaced with a new one after
the batteries are discharged.
How to replace batteries in
FireProtect 2 RB (Heat/Smoke/CO)
The status of the detector's tamper that
responds to detachment of the device from the
surface or opening of the enclosure:
Open — the detector is removed from the
SmartBracket mounting panel, or the
enclosure integrity is violated in another
way. Check the mounting of the detector.
Closed — the detector is installed on the
SmartBracket mounting panel. The integrity