Fs W N - PRINTEX P250 Manual

[Description] Cancel Chinese mode
[Particularize] □ This command only affects when selecting GB18030 code system.
□ When Chinese character mode doesn't be selected, all character codes are ASCII code, process
one character each time.
□
Turn the power on, the printer enters into Chinese character mode automatically. Reference]
FS &, FS C

FS W n __________________________________________________________________________________

[Name] Turn quadruple-size mode on/off for Chinese characters [Format]
ASCII
Hex 1C
Decimal 28
[Range] .0<.n<255
[Description] Turn quadruple-size mode on/off for Chinese characters.
□ When the LSB is 0, turn quadruple-size mode off for Chinese characters
□ When the LSB is 1, turn quadruple-size mode on for Chinese character.
[Particularize] □ Only LSB of n is effective.
□ In quadruple-size mode, the print character size is the same as the print character size which be
set double width and double height.
PRINTEX P250 User Manual
FS W n
57 n
87 n
65