Gs L Nl Nh - PRINTEX P250 Manual

by the conditions of receiving buffer area.
□ Enable automatically restoring (ASB) by GS a, must be distinguished the conditions of transmitting by GS I and
ASB.
Note: At present, no bit 0 changeable information.

GS L nL nH

[Name] Set left margin
[Format] ASCII GS
Hex 1D
Decimal 29
[Range] 0 <nL<255
0 <nH <255 [Description] Set left margin by nL and nH.
□ Set left margin [(nL + nH*256)
The left side blank The width of printable width
□ In stable mode, this command is valid only at the line origin position.
□ Input this command in page mode, the printer only executes the inner sign operation.
□ In page mode, this command can not affect the print.
□ If the set overs the printable area, so uses the max printing unit.
If the left
margin can not be deleted by 8, or, leave out remainder.
(For example) If (nL + nH .*256) = 20, set value as 16o
Note: Uses this command together with GS Л ESC *, print result may not the expected.
[Default] nL = 0, nH = 0
[Reference] GS W
®G S V m ©G S V m n
Select cut paper mode and cut paper
®ASCH
[Name]
[Format]
Hex
Decimal
©ASCII
Hex
Decimal
[Range]
® m = 1, 49 ©
m = 66, 0 <n
[Description]
<255
Select cut paper mode, and execute cut paper operation. Select model by m, as follows:
[The particularize of ® and ©]
□
As the difference of the autocut type, the cut paper status is differento
□
This command affects only when processing this command at the printing origino
[The particularize for ®]
PRINTEX P250 User Manual
L nL nH
4C nL nH
76 nL nH
x
0.125 mm].
□ When execute (GS v 0 ), set left margin by this command, 8 bits as unit.
GS V m
1D 56 m
29 86 m
GS V m
1D 56 m
29 86 m
n
n
n
52