Esc I; Esc J N; Esc M - PRINTEX P250 Manual

change.
□ For stable and page mode, character width will be memoried.
Full cut
ASCII ESC
Hex 1B
Decimal 27
After receiving this command, the printer executes full cut.
As it won't feed paper when executing this command, please assures that feed paper5mm or more
before executing this command next time, to avoid that the cutter be damaged.
The default is partial cut mode.
[Default] Default position is 8 character spacing (raw 9, 17, 25 ...) of type A (12 □ 24). [Reference] HT

ESC i

[Name]
[Format]
[Description]
[Note]
[Default]

ESC J n

[Name] Print and feed paper
[Format] ASCII ESC J
Hex 1B
Decimal 27
[Range] 0 < n <255
[Description] Prints and outputs the data in print buffer area, and
□ After printing, this command
[Notes]
□
affect the data which
□ In stable mode, the printer uses vertical unit(y).

ESC m __________________________________________________________________________________

[Name] Partial cut
[Format] ASCII ESC
Hex 1B
Decimal 27
[Description] The printer received this command, then executing partial cut at present position.
PRINTEX P250 User Manual
i
69
105
n
4A n
74 n
feed
set the originalposition to
set by
m
6d
109
paper [n *0.125 mm ].
the beginning of one line.
The feed paper quantity do not
ESC 2 or ESC 3.
38