Gs Л R T M; Gs F N - PRINTEX P250 Manual

line.
[Default]
Mode type
(82.5 mm paper width type )
(79.5 mm paper width type )
(60 mm paper width type )
(58 mm paper width type )
GS L
[Reference]
л
GS r t m
[Name] Execute macro
[Format]
ASCII Hex Decimal 0 Sr S255 0 St S255 m =0, 1 G
Execute macro S
□
r specifies times of executing macro. 1D
[Range] □
t specifies the waiting time of operating macro. 29
□
m specifies the macro executed mode.
When the LSB of m is 0:
[Description]
Macro continues to execute r times at the specified time spacing.
When the LSB of m is 1:
After the waiting time which specifies by t, PAPER OUT LED will be flashed, and the printer
be waited, FEED button will be pushed. After pushing the button, the printer executes macro one
time. The printer operates r times repeatly.
□
Executes macro one time, the waiting time is t*100ms.
□
If receive this command when defining one macro, so the macro definition will be failed
and the definition will be cleared.
□
If do not define macro or r is 0, do not execute any operation.
□
When operating macro(m=1), feed paper can't be taken by FEED button.
GS :
[Notes]
[Reference]

GS f n

[Name]
Select font for HRI
[Format]
ASCII GS Hex 1D
Decimal 29
n =1, 48, 49
[Range]
[Description] When printing the bar code, selects one font of HRI characters.
n specifies one character font as following table:
Character Font N
PRINTEX P250 User Manual
Horizont al
Default
dot
640 dot nL = 128, nH = 2
576 dot nL = 64, nH = 2
448 dot nL = 192, nH = 1
432 dot nL = 176, nH = 1
5E
94
(Human Readable Interpretation ) characters f n 66
n
102 n
m
m
m
54