Table of Contents
Advertisement
5.1
Command Notation
[Name]
The name of the command
[Format]
The code sequence
[ ] k indicates the contents in brackets [ ] should be repeated k time.
[Range]
Gives the variable allowable ranges
[Description] Describe the functions of the command.
[Particularize] Go into particular use of commands.
[Notes]
Provide important information on setting and using the printer command, if
necessary.
[Default] Gives the default values, if the commands with the parameters.
[Reference] List the interrelated commands.
The data signed by < >H, is hexadecimal.
The data signed by < >B, is binary.
5.2
Explanation of Terms
(1)
Receive buffer
The receive buffer is used to store data from the host computer. All received data is stored in this buffer and processed
in the order received.
(2)
Print buffer
The print buffer is used to store image data for printing.
(3)
Full printing buffer area
The printer buffer is full. When the printer buffer is full, if new printing data comings, the data in the printing buffer area to
be printed, and execute the operation of exchanging the line. The operation the same as the LF commands.
(4)
Initial position of line
Initial position of line conditions meets the falling points:
□ No printing data in the present printing buffer area (includes part empty data which
caused by blank and HT command)
□ Appoints the printing position that have not through ESC $ or ESC \ commands.
(5)
Printable area
The maximum printable area of this printer is as follows:
®S landaud m ode, horizontal direction:
About 72.2mm
©Page m o d e , horizontal direction:
About 72.2mm
©Page m ode, vertcaldnEction:
About 117.3mm
(6)
Print area
The print area set by commands, the print are □ printable area.
(7)
Ignored
All commands in this condition, include the parameters which be read, then discarding, but do not any operations.
(8)
Inch
PRINTEX P250 User Manual
5 COMMANDS
25
Advertisement
Table of Contents
