Gs / M - PRINTEX P250 Manual

Set character width
□ This command affects to all characters (English characters and Chinese) except for
[Notes]
HRI character.
□ If n is out of the definition scale, this command will be ignored.
□ In stable mode, the vertical direction is the feed paper direction.
[Default] n = 0
[Reference] ESC !
[Name] Defines down-load bit image
[Format] ASCII GS
Hex 1D
Decimal 29
[Range] 1 <x <255
1 <y <48 (x *y *1536)
0 <d <255
[Description] Specifies dot by x and y, and defines the down-load bit image.
□ x specify horizontal dot.
□ y specify vertical dot.
□ Horizontal direction dot is x*8; Vertical direction
[Notes]
□
range, this command
□ d
indicates bit image dat. Data
□ In following case, clear down-load bit image definition:
Executes ESC @ .
Executes ESC & .
@ The prhter reset or tum tie power of
□ The connection between down-load bit image and print data as follows.
[Reference] GS /

GS / m

[Name] Prints down-load bit image
[Format] ASCII
Hex
Decimal
[Range]
PRINTEX P250 User Manual
Hex Decimal Width
00 0 1(Standard)
10 16 2(Double width)
32 3
20
30 48 4
40 64 5
50
80 6
96 7
60
70
112 8
x
y
2A x
y
y
42 x
(d) specifies that print bit is 1, Do not print bit that is 0.
GS / m
1D 2F m
29 47 m
48 Л m Л51
d1. ..d( x □ y □ 8 )
d1. ..d( x □ y □ 8 )
d1. ..d( x □ y □ 8 )
dot is y*8.
When x*y overs the defined
is disabled.
48