PRINTEX P250 Manual page 70

this line will adjust along the base line.
□ Bold Chinese character by FS W or GS !, the last received set is effective.
[Default] n = 0
Set Chinese character mode
ASCII FS
Hex 1C
Decimal 28
Select Chinese character mode.
□
This command only affects when selecting GB18030 code system.
□
GB18030 only supports double bytes 1, 2, 3, 4, 5 area.
□
Select Chinese character mode, the printer processes all Chinese character code,
bytes each time.
□
Process Chinese character code as the sequence of the first byte, the second byte.
□
Turn the power on, the printer enter into Chinese character mode automatically.
□
Select Chinese character mode, firstly the printer detects whether the code is Chinese
character or not; If it is the Chinese character and processes the first byte and the second byte.
FS FS C
[Reference] FS -, FS W , GS !
FS &
[Name]
[Format]
[Description]
[Particularize]
two
[Reference]
FS .
[Name] Cancel Chinese mode
[Format] ASCII FS
Hex 1C
Decimal 28
PRINTEX P250 User Manual
&
26
38
.
2E
46
64