PRINTEX P250 Manual page 52

process this command.
□
When receive this command during macro definition, the printer stops macro definition and executes this
command.
□
Once defines one NV bit image, it can't be executed ESC @, and deleted when reset and power off.
□ This command only executes the definition of NV bit image, do not execute print. NV bit image print executed by
FS p.
[Notes]
□ Writes command frequently which could be broken the NV memory.
So, suggests that executes the written operation less than ten times.
After the process of putting one bit image into NV memory, the printer executes one hardware reset operation. So,
defines the user-defined character, download bit image and macro after finishing this command. The printer
clears receive and print buffer area, and reset to the effective mode when turing the power on. At this moment,
the switch DIP set will be checked once again.
[Reference]
FS p
[Examples]
When xL = 64, xH = 0, yL = 96, yH = 0.
PRINTEX P250 User Manual
46