PRINTEX P250 Manual page 55

[Description] Prints down-load bit image by mode which defines by m.
m set mode from following table:
m Mode
0, 48 Stable
1, 49 Double width
2, 50 Double height
3, 51 Quadruple
dpi: per 25.4 mm {linch}
□
[Notes] If the bit image data has not defined, then this command will be ignored.
□ In stable mode, this command affects only when there are no data in the printing buffer area.
□ This command is invalid in print mode [bold, overlap, underline, character size or reverses
blank printing], except for up-down printing mode.
□ If the download bit image which will be printed overs the printable area, then the over data can
not print.
PRINTEX P250 User Manual
Vertical dot
Horizontal dot density
density
203.2 dpi 203.2 dpi
203.2 dpi 101.6 dpi
101.6 dpi 203.2 dpi
101.6 dpi 101.6 dpi
49