PRINTEX P250 Manual page 62

66 UPC-E
67 JAN13 (EAN13)
68 JAN8 (EAN8)
69 CODE39
70 ITF
71 CODABAR
72 CODE93
73 CODE128
Standard
74
EAN13
75 Standard EAN8
[Note ®]
□ This command finished by NUL.
□ When bar code system UPC-A or UPC-E be used, the printer receives 12 bytes bar code data, and
then printing bar code and processing the continued data as normal data.
□ When bar code system JAN13 (EAN13) be used, the printe receives 13 bytes bar code data, and
then printing bar code and processing the continued data as normal data.
□ When bar code system JAN8 (EAN8) be used, the printer receives 8 bytes bar code data, and then
printing bar code and processing the continued data as normal data.
□ The number of ITF bar code data must be even. When inputting the odd number, the printer ignores
the last receiving data.
[Note©]
□ n specifies bar code data bytes, and the printer processes n byte data as bar code data from the next
character.
□ If n overs the specified range, the printer stops processing this command, and processes the
continued data as the normal data.
[Notes in standard mode]
□ If d overs the specified range, the printer only feeds paper and processes the continued data as the
normal data.
□ If horizontal direction size overs the printable area, the printer only feeds paper.
□ This command feeds paper as the requirement of bar code, do not relate the line spacing which set
by ESC 3 or ESC 2.
□ This command affects only no data in printing buffer area. When there are data in printing buffer
area, the printer processes the continued data of n as the normal data.
□ After printing bar code, this command set the origin line as the printing position.
□ This command do not affect the print mode (bold, overlap, underline, character size, invert blank
print, or character 90°revolution etc.), except for the upside down print mode.
[Notes in page mode]
□ This command makes bar code data in the print buffer area, but do not print. After processing bar
code data, this command moves the print position to the right dot of bar code.
□ If d overs the specified range, the printer stops processing the commands and deals
PRINTEX P250 User Manual
11 < n <12
12 < n < 13
7 < n <8
48 < d < 57, 65 < d <90, 32, 36, 37, 43,
1 < n < 255
1 < n <255 (n is even)
48 < d < 57, 65 <d <68, 36, 43, 45, 46,
1 < n < 255
1 < n <255
1 < n < 255
12 < n < 13
7 <n <8
48 < d <57
48 < d <57
48 < d <57
45, 46, 47
48 < d < 57
47, 58
0 < d < 127
0< d < 127
48< d < 57
48 <d < 57
56