Esc \ Nl Nh - PRINTEX P250 Manual

[Note] As the printer do not feed paper when executing this command,
this command in the next time, assure that feed paper at least 5mm or more, prevent cutter broken.
[Default] Partial cut mode is default.

ESC \ nL nH _____________________________________________________________________________

[Name] Set relative print position
[Format] ASCII ESC
Hex 1B
Decimal 27
[Range] 0 <nL <255
0 <nH <255
[Description] On basis of present position, set print starting position by horizontal and
PRINTEX P250 User Manual
\ nL nH
5C nL nH
92 nL nH
sobeforeexecuting
39