Nortel Norstar ICS Remote Tools 11 Quick Start Manual page 34

34 Using Norstar ICSRT Tools version 11
Click on the Get System ID / Business Name button to ensure that you are backing up from
7
or restoring to the correct system.
Click on the System programming check box to make it active. Note that the Backup Now
8
button becomes active.
Click on Browse and navigate to the manual backup folder you created in the customer
9
database/backup folder. Refer to
10 If you are performing a restore operation
is selected, unless you want to restore the archive backup.
11 Start the Backup or restore:
• To perform an immediate backup, click on Backup Now.
The backup begins immediately. The Progress field indicates how the backup is
progressing. If you encounter errors or need to stop the backup, click on Stop.
• To perform an immediate restore operation, click on Restore Now.
The restore begins immediately. The Progress field indicates how the restore is
progressing. If you encounter errors or need to stop the restore process, click on Stop.
12 When the operation is complete, click on Done.
If you need to restart the backup or restore while it is running, click on the Reset button.
The backup is stored as FNVRAM.new.
If there was a previous backup file, it is renamed as FNVRAM.old.
13 When you complete the required activity, ensure that you exit the connection to the Norstar
system:
On your desktop, click on the Norstar ICS Programming Tools screen, which sits behind
a
the Customer Info screen.
b On the top menu, click on Tool and select Terminate Connection.
N0004998 01
Figure 22.
(Figure 24), ensure that the Restore most recent file