Inspection Log; Safety Information - Guardian Fall Protection 01500 Instruction Manual

Rope grab
Table of Contents

Advertisement

Inspection Log

User must inspect prior to EACH use. Competent Person other than user must complete formal
inspection at least every 12 months. Competent Person to inspect and initial.
Date of First Use: __________________. Product lifetime is indefinite, as long as product passes all
inspection requirements.
This inspection log must be specific to one Rope Grab. Separate inspection logs must be used for each
Rope Grab. All inspection records must be made visible and available to all users at all times.
If equipment fails inspection IMMEDIATELY REMOVE FROM SERVICE.

Safety Information

!
WARNING
Do not alter equipment. Do not misuse equipment.
Workplace conditions, including, but not limited to, flame, corrosive chemicals, electrical shock, sharp objects,
machinery, abrasive substances, weather conditions, and uneven surfaces, must be assessed by a Competent
Person before fall protection equipment is selected.
The analysis of the workplace must anticipate where workers will be performing their duties, the routes they
will take to reach their work, and the potential and existing fall hazards they may be exposed to. Fall
protection equipment must be chosen by a Competent Person. Selections must account for all potential
hazardous workplace conditions. All fall protection equipment should be purchased new and in an unused
condition.
Fall protection systems must be selected and installed under the supervision of a Competent Person, and used
in a compliant manner. Fall protection systems must be designed in a manner compliant with all federal, state,
and safety regulations. Forces applied to anchors must be calculated by a Competent Person.
Unless explicitly stated otherwise, the maximum allowable free fall distance for lanyards must not exceed 6'.
No free fall allowed for non-LE SRLs. Class A SRLs must arrest falls within 24"; Class B SRLs must arrest falls
within 54".
Failure to understand and comply with safety regulations may result in
serious injury or death. Regulations included herein are not all-inclusive,
are for reference only, and are not intended to replace a Competent
Person's judgment or knowledge of federal or state standards.
6

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 01500 and is the answer not in the manual?

Questions and answers

This manual is also suitable for:

015030150501506015070150801509 ... Show all

Table of Contents