Inspection Log; Safety Information - Guardian Fall Protection Rapid Deployment Rescue Ladder Instruction Manual

Inspection Log

Date of First Use: __________________.
Product lifetime is indefinite, as long as
product passes all inspection require-
ments. User must inspect prior to EACH
use. Competent Person other than user
must complete formal inspection at least
every 6 months. Competent Person to
inspect and initial.
This inspection log must be specific to one
RDRL. Separate inspection logs must be
used for each RDRL. All inspection records
must be made visible and available to all
If equipment fails inspection
users at all times.
IMMEDIATELY REMOVE FROM SERVICE.

Safety Information

Failure to understand and comply with safety regulations may result in
serious injury or death. Regulations included herein are not all-inclusive,
! WARNING
are for reference only, and are not intended to replace a Competent
Person's judgment or knowledge of federal or state standards.
Do not alter equipment. Do not misuse equipment.
Workplace conditions, including, but not limited to, flame, corrosive chemicals, electrical shock, sharp objects,
machinery, abrasive substances, weather conditions, and uneven surfaces, must be assessed by a Competent
Person before fall protection equipment is selected.
The analysis of the workplace must anticipate where workers will be performing their duties, the routes they
will take to reach their work, and the potential and existing fall hazards they may be exposed to. Fall
protection equipment must be chosen by a Competent Person. Selections must account for all potential
hazardous workplace conditions. All fall protection equipment should be purchased new and in an unused
condition.
Fall protection systems must be selected and installed under the supervision of a Competent Person, and used
in a compliant manner. Fall protection systems must be designed in a manner compliant with all federal, state,
and safety regulations. Forces applied to anchors must be calculated by a Competent Person.
Unless explicitly stated otherwise, the maximum allowable free fall distance for lanyards must not exceed 6'.
No free fall allowed for non-LE SRLs. Class A SRLs must arrest falls within 24"; Class B SRLs must arrest falls
within 54".
Harnesses and connectors selected must be compliant with manufacturer's instructions, and must be of
compatible size and configuration. Snap hooks, carabiners, and other connectors must be selected and applied
in a compatible fashion. All risk of disengagement must be eliminated. All snap hooks and carabiners must be
self-locking and self-closing, and must never be connected to each other.
6