Inspection; Inspection Log - Guardian Fall Protection Diablo Cable SRL Instruction Manual

Inspection

Prior to EACH use, inspect Diablo Cable SRL for deficiencies, including, but not limited to, corrosion,
deformation, pits, burrs, rough surfaces, sharp edges, cracking, rust, paint buildup, excessive heating,
alteration, broken stitching, fraying, bird-caging, and missing or illegible labels. Pay careful attention to cable
swage (located beneath rubber stopper) and ensure no damage is present at location where swage contacts
lifeline. IMMEDIATELY remove Diablo Cable SRL from service if defects or damage are found, or if exposed to
forces of fall arrest. During inspection, consider all applications and hazards Diablo Cable SRL has been
subjected to.
Ensure that applicable work area is free of all damage, including, but not limited to, debris, rot, rust, decay,
cracking, and hazardous materials. Ensure that selected work area will support the application-specific
minimum loads set forth in this instruction manual. Work area MUST be stable.
At least every 6 months, a Competent Person other than the user must inspect Diablo Cable SRL.
Competent Person inspections MUST be recorded in inspection log in instruction manual and on
equipment inspection grid label. The Competent Person must sign their initials in the box
corresponding to the month and year the inspection took place.

Inspection Log

Date of First Use: __________________.
Product lifetime is indefinite, as long as product passes all inspection requirements. User must inspect
prior to EACH use. Competent Person other than user must complete formal inspection at least every
6 months. Competent Person to inspect and initial.
This inspection log must be specific to one Diablo Cable SRL. Separate inspection logs must be used for
each Diablo Cable SRL. All inspection records must be made visible and available to all users at all
times.
If equipment fails inspection
IMMEDIATELY REMOVE FROM SERVICE.
5