Engineering the switch
To configure a CDN with LD 23
Use these prompts and responses in Overlay 23. For prompts that are not
specified in the following table, press Enter.
Prompt
REQ
TYPE
CUST
CDN
RPRT
DFDN
CNTL
REQ
What next?
You must also configure the CDN in the TAPI Configuration Tool (see the
Installation and Maintenance Guide). Ensure that the DN Monitored box is
checked.
You must configure the CDN as a route point address in the
Communication Control Toolkit Configuration Tool (see the Installation
and Maintenance Guide).
When developing your application, use the appropriate API call to acquire
the CDN.
82
Response
Description
NEW
Add a CDN.
CDN
Control DN data block
0–99
Customer number
xxxx
Control Directory Number
No
Deactivate the report control option.
xxx(xxxx)
Default ACD-DN. The ACD-DN to which the
call is routed if there is a problem on
Communication Control Toolkit.
Yes
DN is controlled by Communication Control
Toolkit.
END
Exit from overlay.
Standard 5.01
Communication Control Toolkit