The page refreshes. A new
appears. Messages describing problems appear in the message
area. If no errors exist, the message
found
is displayed in the message area.
8. Correct any errors in the data.
9. Repeat steps 7 and 8 until you cannot find any errors.
10. Click Save.
11. Schedule the data synchronization.
Deleting an Auto Dial key
To remove the ADL function from a key on your telephone:
1. On the
Telephone Details
down until the ADL key is visible.
The existing parameters are displayed in the
2. In the
Key Type
down list.
The
Telephone Details
Unassigned
Value
column has no parameters.
3. On the
Telephone Details
The page refreshes. A new
appears. Messages describing problems appear in the message
area. If there are no errors, the message
found
is displayed in the message area.
4. Correct any errors in the data.
5. Repeat steps 3 and 4 until you cannot find any errors.
6. Click Save.
7. Schedule the data synchronization.
Validation errors
page, go to the
column, choose
page refreshes. The key type
is displayed in the
page, click Validate.
Validation errors
message area
No validation error(s) were
Keys
Key Value
NUL - Unassigned
Key Type
column, and the
message area
No validation error(s) were
Telephone Details
section and scroll
column.
from the drop-
NUL -
Key
17