Nortel Manager User Manual page 19

The Telephone Details
required parameters,
in the Key Value
3. Determine the maximum number of digits of your CFW DN.
4. In the Redirection DN Length
of digits of your CFW DN. See Figure 4 on page 19.
5. To program the CFW DN by using the Web display, in the
Redirection DN
Note 1: After the key is configured on your telephone, you can also
use the CFW key to program the DN.
Note 2: When you change a key type, the system default parameter
values for the new key type do not appear. If you specify a redirection
DN length that is greater than the system maximum, or if you specify
a redirection DN that has more digits than the system maximum, you
receive a validation error.
Figure 4: Entering the CFW parameters
6. Click Validate
The page refreshes. A new
appears. Messages describing any problems appear in the message
area. If there are no errors, the message
found is displayed in the message area.
7. Correct any errors in the data.
8. Repeat steps 6 and 7 until you cannot find any errors.
9. Click Save.
10. Schedule the data synchronization.
page refreshes. The system displays the
Redirection DN Length
column. An edit box is provided for each parameter.
edit box, enter the maximum number
edit box, enter the DN.
on the Telephone Details
Validation errors
Telephone Details
and Redirection
page.
message area
No validation error(s) were
DN,
19