Chapter 2
Getting started
This chapter describes methods for configuring and managing the Nortel VPN
Router .
Full details on hardware installation, including adding local area network (LAN)
or wide area network (WAN) cards, are in the Getting Started or installation guide
that came with the Nortel VPN Router. You should complete the hardware
installation before starting this chapter.
IP addressing
Figure 3 on page 30
Nortel VPN Router. Refer to
Note: If you are setting up a Nortel VPN Router 1010, 1050 or 1100,
see
Chapter 3, "Setting up the Nortel VPN Router 1010, 1050, and
1100." These VPN Routers have unique set up and configuration
considerations.
shows sample IP address assignments in a network using a
Table 1 on page 30
to see the IP address associations.
Nortel VPN Router Configuration — Basic Features
29