Figure 4 Mva On Separate Subnet From Private Physical Interfaces - Nortel Contivity 1100 Configuration Manual

32 Chapter 2 Getting started
•
•
•
To enable or disable management protocols, go to Services > Available window.
From this window, you can also specify whether to manage the VPN Router from
the public or private side. To redistribute the MVA, go to Routing > Policy
window.
Figure 4
of the private physical interfaces.

Figure 4 MVA on separate subnet from private physical interfaces

Figure 5 on page 33
of the private physical interfaces.
NN46110-500
Identification
CRL Retrieval
CMP
shows MVA with the CLIP address on a subnet that is separate from any
shows MVA with the CLIP address on the same subnet as one