Changing The Management Ip Address; Figure 7 Deployment Scenario - Nortel Contivity 1100 Configuration Manual

Vpn router basic features
Hide thumbs Also See for Contivity 1100:
Table of Contents

Advertisement

Figure 7 Deployment Scenario

Changing the management IP address

To manage the system, the network must have a route to the management IP
address through one of the system interfaces.
To change the management IP address, complete the following procedure:
1
2
3
Connect the serial cable (supplied with your Nortel VPN Router) from the
Nortel VPN Router serial port to a terminal or a communications port of a PC.
Power on the terminal or PC.
Using a terminal emulation program, such as HyperTerminal on the PC,
access the Nortel VPN Router. Your terminal emulator must use the following
communications parameters:
9600 baud
8 data bits
Nortel VPN Router Configuration — Basic Features
Chapter 2 Getting started 41

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Contivity 1010Contivity 1050

Table of Contents