Figure 26 Sample Branch Office Configuration - Nortel Contivity 1100 Configuration Manual

134 Chapter 6 Configuring branch office tunnels

Figure 26 Sample branch office configuration

As the administrator of a branch office connection, you can manage the level of
access that you give to users of the connection. You specify when the connection
is used, what operations can be done through the connection, and which systems
on the private networks can be accessed.
Before configuring a branch office connection, check that the following
management windows are set up in accordance with your management policies
and the planned usage for the connection. You use the settings on these pages
when you configure the branch office connection.
•
•
•
NN46110-500
The System > Forwarding window must allow branch office-to-branch office
traffic.
The Profiles > Networks window must list the Nortel VPN Router's private
networks. In the sample configuration, the local Nortel VPN Router's internal
network name is boston_hq and the subnets are 10.17.20.0 and 10.17.21.0.
The remote systems behind the remote Nortel VPN Router can reach systems
in these networks.
The remote Nortel VPN Router's internal network name is cleveland_sales
and the subnets are 10.17.20.0 and 10.17.21.0. The remote systems behind the
local Nortel VPN Router can reach systems in these networks.
The Profiles > Hours window must have the Hours of Access setting that you
want to use. The example uses the setting of Anytime.