Caution On Unpacking And Before Installation - Boser HS-6301 Manual

2.2 Caution on Unpacking and Before Installation

Follow the steps in section 2.1 to protect the HS-6301 from electricity
discharge. With reference to section 1.3, please check the delivery
package again with the following steps：
1. Unpack the HS-6301; Store away all packing materials, manual and
diskette, etc.
2. Is there any component missing？ DO NOT INSTALL IF THIS
HAPPENS.
3. Is there any visual damaged of the board？ DO NOT INSTALL IF THIS
HAPPENS.
4. Check the optional parts (i.e. CPU, SRAM, DRAM, ROM-Disk etc.) to
complete settings of jumpers, jumper pin-set and CMOS setup,
please refer to all information on jumper settings in this manual.
5. Check the external devices (i.e. Add-On-Card, Driver Type etc.). To
complete add-in or connections and CMOS setup correctly, please
refer to all information of connector connections in this manual.
6. Keep the manual and diskettes for re-installation purposes or if you
would like to change the Operating System.
11