5.2 LAN INSTALL FOR WIN98 & NT4.0
1. Click Start, then Setting, in the "Setting" select Control panel.
2. Start the network applet program.
3. In the Network window, click "Add".
4. In the Select Network Component Type, select Adapter then click
"Add".
5. When the Select Network Component Type, Select Adapter, then
click "Add".
Specify the path the new driver and press <ENTER> key.
6.
a:, type a:\)
(If you're not sure exactly where the drivers are, choose the "Browse"
button and find it)
Select Intel EtherExpress PRO/100+ Management Adapter
7. Click OK.
8. Windows 98 will copy the network drivers to the proper directories
on your system.
9. Continue choosing "OK", util asked to restart your system.
10. After restart, checking on the network driver , the Properties of the
driver should look similar to the following figure.
48
(If in driver