Editing Ppp Options - Nortel 222 User Manual

62 Chapter 3 WAN and Dial Backup Setup
Table 9 Fields in menu 11.2 remote node profile (Backup ISP)
Field
Schedules
Nailed-Up
Connection
Session Options
Edit Filter sets
Idle Timeout

Editing PPP options

The Business Secure Router dial back-up feature uses PPP. To edit the remote
node PPP options, move the cursor to the [Edit PPP Options] field in Menu 11.2
- Remote Node Profile, and use the space bar to select [Yes]. Press [Enter] to
open Menu 11.2.1 as shown in
NN47922-501
Description
You can apply up to four schedule sets here. For more
details, refer to Chapter 18, "Call scheduling," on page
213.
Press [SPACE BAR] to select Yes to set this connection
to always be on, regardless of whether or not there is
any traffic. Select No to have this connection act as a
dial-up connection.
This field leads to another "hidden" menu. Use
[SPACE BAR] to select Yes and press [ENTER] to open
menu 11.2.4 to edit the filter sets. See
filter" on page 69 for more details.
Enter the number of seconds of idle time (when there is
no traffic from the Business Secure Router to the remote
node) that can elapse before the Business Secure
Router automatically disconnects the PPP connection.
This option only applies when the Business Secure
Router initiates the call.
After you configure this menu, press [ENTER] at the
message "Press ENTER to Confirm..." to save your
configuration, or press [ESC] at any time to cancel.
Figure
"Remote node
13.
Example
1,3,5
No
(default)
No
(default)
100
seconds
(default)