42 Chapter 2 Introducing the SMT
After the tests, the Business Secure Router asks you to press
as shown in
Figure 2 Initial screen
initialize ch =0, ethernet address: 00:A0:C5:22:1A:03
initialize ch =1, ethernet address: 00:A0:C5:22:1A:04
Press ENTER to continue...
Logging on to the SMT
The logon screen appears after you press [ENTER], prompting you to enter the
username, as shown in
Type the username (nnadmin is the default) and press [ENTER].
The logon screen prompts you to enter the password.
Figure 3 SMT Login
Enter Username : XXXX
Enter Password : XXXX
Type the password (PlsChgMe! is the default) and press [ENTER]. As you type
the password, the screen displays an X for each character you type.
Note that if there is no activity for longer than five minutes after you log on, your
Business Secure Router will automatically log you off and display a blank screen.
If you see a blank screen, press [ENTER] to bring up the logon screen again.
Navigating the SMT interface
The SMT is an interface that you use to configure your Business Secure Router.
NN47922-501
Figure
2.
Figure
3.
[ENTER] to continue,