Figure 44 Menu 15.1.1.1: Editing Or Configuring An Individual Rule In A Set; Table 30 Menu 15.1.1.1: Editing Or Configuring An Individual Rule In A Set - Nortel 222 User Manual

116 Chapter 9 Network Address Translation (NAT)

Figure 44 Menu 15.1.1.1: Editing or configuring an individual rule in a set

Menu 15.1.1.1 Address Mapping Rule
Type= One-to-One
Local IP:
Start=
End = N/A
Global IP:
Start=
End = N/A
Press ENTER to Confirm or ESC to Cancel:
Table 30

Table 30 Menu 15.1.1.1: Editing or configuring an individual rule in a set

Field
Type
Local IP
Start
End
NN47922-501
describes the fields in
Description
Press [SPACE BAR] and then [ENTER] to select from a total
of five types. If you choose Server, you can specify multiple
servers of different types behind NAT to this computer. See
"Example 3: Multiple public IP addresses with inside servers"
on page 124 for an example.
Only local IP fields are N/A for server; Global IP fields must be
set for Server.
Enter the starting local IP address (ILA).
Enter the ending local IP address (ILA). If the rule is for all
local IPs, then put the Start IP as 0.0.0.0 and the End IP as
255.255.255.255. This field is N/A for One-to-One and Server
types.
Figure 44.
Example
One-to-On
e
0.0.0.0
N/A